/*
   Name:		NRF_Radio.ino
   Created:	11/30/2018 2:40:19 AM
   Author:	michael
 */

#include "NRF51_Radio_library.h"

NRF51_Radio MicrobitRadio = NRF51_Radio();

FrameBuffer *myDataSendData;
const int COL1 = 3; // Column #1 control
const int LED = 26; // 'row 1' led
const long interval = 5000;

// define prototypes for any methods that use 'user types' created in .ino code or use cpp/h files
//
void test(NRF51_Radio _lib1);

// methods below here
//

// the setup function runs once when you press reset or power the board
void setup() {
  Serial.begin(115200);
  Serial.println("Starting the Radio Library");
  pinMode(COL1, OUTPUT);
  digitalWrite(COL1, LOW);
  pinMode(LED, OUTPUT);

  myDataSendData = new FrameBuffer();
  MicrobitRadio.hello("Test");
  MicrobitRadio.setGroup(10);
  MicrobitRadio.enable();
}

// the loop function runs over and over again until power down or reset
void loop() {
  digitalWrite(LED, HIGH);

  static long currentMillis;

  FrameBuffer* myData = MicrobitRadio.recv();
  if (myData != NULL) {
    Serial.print(myData->length);
    Serial.print("    ");
    Serial.print(myData->version);
    Serial.print("    ");
    Serial.print(myData->group);
    Serial.print("    ");
    Serial.print(myData->protocol);
    Serial.print("    ");
    Serial.print(myData->payload[10]);
    Serial.print("    ");
    Serial.println(MicrobitRadio.dataReady());
    delete myData;

    myDataSendData->length = 3;
    myDataSendData->group = 10;
    myDataSendData->version = 12;
    myDataSendData->protocol = 14;


    if (millis() - currentMillis >= interval)
    {

      Serial.println(currentMillis);
      MicrobitRadio.send(myDataSendData);
      currentMillis = millis();
    }
  }

  delay(100);
  digitalWrite(LED, LOW);
  delay(100);
}

//This method demonstrates 1) using a library 2) using user types as function params
void test(NRF51_Radio _lib1)
{
  MicrobitRadio.hello("Hello Visual Micro");
}